Subscribe
Commercial Gym Equipment

info@gymwarehouse.co.uk

Gym Cable Replacement DIY – How to fit your own replacement cable to your gym weights machine

DIY Replacement Gym Cable
DIY Replacement Gym Cable

Gym Cable Replacement DIY – How to fit your own replacement cable to your gym weights machine

DIY instructions on how to make your own DIY replacement gym cables.

SKU: Treadmill Motor / Drive Belt Tightening Category:

Product Description

Gym Cable Replacement DIY

Time to replace your gym cables?  Rather than getting the expensive originals why not get a generic replacement from gymwarehouse.  These are easier to fit, much quicker, require few tools and will be very cost effective.

The Gymwarehouse cable replacement system utilise screw fit cable terminations so they are quick and can use cable cut from a reel rather than dedicated cable lengths with pre-fitted ends.  The only tools that are required are a spanner, allen key and cutters.  Please see the guide below are to fitting and view the video.

N.B. we are receiving increasing requests for export of these components top USA.  While we can export to most countries we cannot currently to USA.  Appologies for any inconvenience.
Remove old cable, (cut if necessary).
Select suitable new cable and thread through pulleys.Fit cable termination to one end and attach to machine, (best to fit the non adjustable end first).  Screw tight.
Carefully measure other end of cable ensuring the cable is fitted correctly over all pulleys.
Cut Cable.
Attached 2nd cable termination and screw tight.
Attach to machine and adjust using turnbuckle if necessary.
We usually test under full impact load to ensure cable is tight.
Cables can be sharp, please use care and Personal Protective Equipment.

Please see video below for further guidance

Sign up to Newsletter

Contact Us

Nethercott
Chawleigh
Chulmleigh
Devon EX18 7LA

Telephone : 01769 580099
E-mail: info@gymwarehouse.co.uk

Google Map